Products

Cyclone V

SoCrates II

<<<<<< OBSOLETE >>>>>>

 

SoCrates II is our second Edition of our SoC-FPGA based starterkit.
» more

DBM-SoC2-Base1

The DBM-SoC2-Base1 is a reference base board for the DBM-SOC2 modules. This base board is optimized for industrial communication Topics. It provides the Gigabit Ethernet and USB Interface of the module. Three 100Mbit Ethernet Phys together with the Access-IP license device can be used to provide Real Time Ethernet protocols on the module. A 100 pin expansion connector provides the remaining FPGA and HPS signals.
Price: 299.00€ (incl. VAT: 355.81€)» more

DBM-SoC2

The DBM-SoC2 board is based on the Altera Cyclone V SoC devices and is equipped with 1 Gbyte DDR3 Memory, 4Gbyte e.mmc flash, 256Mbit QSPI Flash, Gigabit Ethernet Phy, USB-OTG Phy and the complete power supply for the various voltage rails. To provide a low cost module the DBM-SoC2 is build in the SO-DIMM 200 form factor. The module is available in two FPGA configurationes and can be ordered with e.mmc flash or SD-Card Slot.

  • DBM-SoC2-A2: Price: 179,00 € (incl. VAT: 213,01 €)
  • DBM-SoC2-A2-SD: Price: 179,00 € (incl. VAT: 213,01 €)
  • DBM-SoC2-A4: Price: 199,00 € (incl. VAT: 236,81 €)
  • DBM-SoC2-A4-SD: Price: 199,00 € (incl. VAT: 236,81 €)
» more

DBM-SoC1-Base1

The DBM-SoC-Base1 is an example baseboard for the DBM-SoC1 module. This baseboard provides a possible setup for the HPS peripherals like Gigabit Ethernet Phy, USB-Phy, RS232 port and all other available signals on 2.54mm pinheader.
Price: 299.00 € (incl. VAT: 355.81 €)» more

DBM-SoC1

The DBM-SoC1 board is a complete module based on a Cyclone V-SoC device with 25K, 40K, 85K or 110K LE. The module is based on the Cyclone V SoC device, speedgrade 7. One Gbyte DDR3 memory, 4Gbyte eMMC Flash, and a 256 Mbit Configuration device are implemented. All FPGA signals and all the available HPS signals are routed to two 150pin high speed connectors on the back side of the board.

  • DBM-SoC1-A2 Price: 198.00 € (incl. VAT: 235.62 €)
  • DBM-SoC1-A4 Price: 223.00 € (incl. VAT: 265.37 €)
  • DBM-SoC1-A5 Price: 232.00 € (incl. VAT: 276.08 €)
  • DBM-SoC1-A6 Price: 281.00 € (incl. VAT: 334.39 €)
» more

DB5CGXFC7

<<<<<< OBSOLTE >>>>>>
The DB5CGXFC7 Board is based on the Altera Cyclone V GX device providing PCIe and SPF cages for the transceivers, 32bit width DDR3 memory and a QSPI configuration device for active serial configuration.» more

SoCrates

<<<<<< OBSOLETE >>>>>>

 

SoCrates is a starter kit based on the new SoC-FPGA from Altera
» more

DBC5CEFA7

The DBC5CEFA7 is the fourth generation of our DBC industrial development board
Price: 629.00 € (incl. VAT 748.51 €)» more

Cyclone IV

DB4CGX15

The DB4CGX15 is the ideal starting point for low-cost, high-volume FPGA applications requiring the PCIe interface.
Price: 153.00 € (incl. VAT: 182.07 €) » more

DB_Start_4CE10

Cyclone IV Starterkit based on EP4CE10, SDRAM and embedded USB-Blaster
Price: 115.00 € (incl. VAT: 136.85 €) » more

DBC4CE55

Development Board DBC4CE55 based on Altera Cyclone IV EP4CE55F484C7

  • DBC4CE55 Price: 579.00 € (incl. VAT: 689.01 €)
  • DBC4CE55/USBB Price: 631.00 € (incl. VAT: 750.89 €)
  • DBC4CE55NIOS-USBB Price: 725.00 € (incl. VAT: 862.75 €)
  • no longer available
» more

Cyclone III

DBM3Cxx

DBM3Cxx board is available in four different versions:

  • DBM3C16 (based on EP3C16C7N) Price: 210.00 € (incl. VAT: 249,90 €)
  • DBM3C40 (based on EP3C40C7N) Price: 220.00 € (incl. VAT: 261,80 €)
  • DBM3C55 (based on EP3C55C7N) Prices on request
  • DBM3C80 (based on EP3C80C7N) Prices on request
» more

DBM_CIII_Base

Further information for this board is currently not available online.» more

DBM2_3Cxx

The DBM2_3Cxx Board is available in two variants differing in the complexity of the FPGA. Both boards are equipped with a Cyclone III FPGA with fastest speedgrade, 64Mbyte DDR2 x8 @ 200MHz, 64Mbyte DDR2 x32 @ 200MHz, 32Mbyte Flash, 32Mbit donfiguration device, 64Kbit EEPROM and Gigabit Ethernet Phy.

The Board is available with 40KLE and 55KLE:

  • DBM2_3C40C6 Price: 231,00 € (incl. VAT: 274,89 €)
  • DBM2_3C55C6 Price: 374,00 € (incl. VAT: 445,06 €)
» more

Application kits

Semikron 3Level Adapter

Interface between the DBC5CEFA7 FPGA development Board and the Semikron 3Level SkiiP 28MLI07E3V1 Evaluation Inverter.» more

FalconEye-Hunter-HSMC

Single Axis Motor Control Reference Design for Altera Development Boards with HSMC connector» more

FalconEye-3-Level

3-Level Inverter Reference Design» more

FalconEye-Hunter

Further information for this board is currently not available online.» more

FalconEye-FPGA

FPGA Based Motor Control Reference Design» more

Arria II

DBM3_2AGX260

The Arria II GX System module with two 64Mbyte DDR2 Memory blocks, NOR Flash, Gigabit Ethernet and 179 free I/O Signals, as well as eight Transceiver channels.
Price: 1199.00 € (incl. VAT 1426.81 €) » more

DBM3_Base1

The DBM3_Base1 is a base board for the DBM3 modules. It provides the power supplies for the module and the JTAG connector, 2.54mm Pin Header for the I/O Signals and SATA connectors for the Transceiver signals.
Price: 499.00 € (incl. VAT: 593.81 €) » more

CPLD / MAX10

HyperMAX

The HyperMAX board is our Altera MAX10 developement board using the Hyperbus Memory from Cypress and ISSI. Beside the MAX10 and the Memory Interface the board provides several communication Interfaces, a security device and Expansion connectors as well as the typical LEDs, Buttons and DIP-Switches.

  • HyperMAX-25: price: 250,00 € (incl. VAT: 297,50 €)
  • HyperMAX-50: price: 300,00 € (incl. VAT: 357,00 €)
» more

DB1270

MAX II Development Board based on Altera EPM1270T144C5.
Price: 95.00 € (incl. VAT.: 113.05 €) » more

DB570

MAX-II Development Board based on Altera EPM570T100C5
Price: 70,00 € (incl. VAT: 83,30 €) » more

DB240

MAX-II Development Board on Altera EPM240T100C5
» more

IP-Core

DB_EPCQ

The DB_EPCQ IP-Core provides random access to EPCQ devices. The IP-Core is delivered as QSys component and can easily be added in NIOS / HPS based systems. The DB_EPCQ maps the entire flash memory into the address map of the QSys design. » more

Others

DB-UBLASTER2

Altera USB-Blaster II compatible JTAG Adapter. The DB-UBLASTER2 is available in two versions: as tool and as module which can be integrated in systems.

  • DB-UBLASTER2: Price: 109.00 € (incl. VAT: 129.71 €)
  • DB-UBLASTER2-EMB: Price on request)
» more

DBA-PCIE-Extender

Further information for this board is currently not available online.» more